热能去毛刺机的缺点。
此种工艺不能生成特殊的圆角,也不能抛光工件表面,而且工件大小受毛刺去除腔室体积的限制。
(例如:直径 x 高:250 x 300毫米;250 x800毫米;320 x 300毫米;400 x 300毫米;250 x 400毫米;320 x 400毫米;400 x 400毫米以及塑料件加工时的420 x 420 x 800毫米)
设备功能Equipment functions
1. 去除边缘较硬毛刺Remove hard burrs from edges
2. 去除切割熔渣Removal of cut slag
3. 倒R角功能R angle function
4. 强力真空吸附传送带Strong vacuum adsorption conveyor belt
5. 磨料自动补偿Automatic abrasive compensation
6. 磨料寿命提示Abrasive Life Tips
7. 一键自动运行One-click automatic operation
8. 去除氧化皮scale removal
9. 宽砂带纠偏功能Correction Function of Wide Sand Belt
适合工件Suitable for workpiece
1. 激光等热切割小毛刺及小熔渣Laser hot cutting small burr and small slag
2. 边缘内孔小毛刺及翻边 Small burrs and flanging inside edges