v液压步履式CFG打桩机厂家直供打桩机
V hydraulic piling machine CFG piling machine direct supply piling machine
一、液压步履式CFG打桩机概述：
1. Summary of the CFG piling machine.
桩机组成该机包含液压步履桩架和钻进体系两部分。桩架选用液压步履式底盘，自动化程度高，可自行行走及反转，设有液压支腿以辅佐行走及反转并添加施工时的整机稳定性。桩架起计有拖行设备，可整机进行转运。立柱为可折叠式箱型立柱，法兰衔接方式，由液压缸操控其起降。钻进体系包含动力头与钻具，动力头的输出轴与螺旋钻具为中空式，桩机选用长螺旋成孔，可通过钻杆中心管将混凝土{或泥浆]进行泵送混凝土ＣＦＧ桩施工，即能钻孔成孔一机一次完结，也可用于干法成孔、注浆置换改动钻具后还可采纳深层拌和等多种工法进行施工。
The pile machine consists of two parts: hydraulic walking pile frame and drilling system. The hydraulic stepping chassis is selected for the pile frame with high degree of automation, and it can walk and reverse itself. It has hydraulic leg to assist in walking and reversing and adding the stability of the whole machine. The piles are equipped with towing equipment and can be transported by the whole machine. The column is a foldable box column, and the flange is connected by a hydraulic cylinder to control its take-off and landing. The drilling system includes the power head and the drilling tool, the output shaft of the power head and the spiral drilling tool are hollow type. The pile machine selects a long spiral hole. The concrete {or mud can be pumped through the center pipe of the drill pipe to pump concrete CFG pile, that is, it can drill a hole in one machine to complete one time, and can also be used for drilled holes and grouting replacement to change drilling tools. After that, various construction methods such as deep mixing can be adopted for construction.
二、液压步履式CFG打桩机主要参数：
Two. The main parameters of the hydraulic gait CFG piling machine:
最大钻孔深度 23m
Maximum borehole depth 23m
钻孔直径 300-600mm
Borehole diameter 300-600mm
最大提升力KN 240
Maximum lifting power KN 240
立柱答应倾斜视点 3o
The pillar promises to tilt the point of view 3O
立柱有用长度mm 26000
The useful length of the column mm 26000
动力头有用功率kw 55*2
Power head useful power kw 55*2
钻杆钻速r/min 23.5
Drill rod drilling speed r/min 23.5
动力头最大输出扭矩KN.m 35.1
Power head maximum output torque KN.m 35.1
行走步距mm 1500
Walking distance mm 1500
反转视点 180°
Reversal point of view 180 degrees
履靴接地比压力 kn/m2 50
Shoe ground pressure kn/m2 50
液压体系最大作业压力MPa 16
Maximum operating pressure of hydraulic system MPa 16
作业状况地上答应最大坡度 2°
The maximum slope is 2 degrees on the job condition.
外形尺寸 （长*宽*高mm）作业状况 10370*5000*27100
Outline size (length * width * height mm) operation condition 10370*5000*27100
外形尺寸 （长*宽*高mm）邮寄状况 14500*3000*3960
Appearance size (length * width * height mm) mail status 14500*3000*3960
桩机质量 T 作业状况 40
Piling machine quality T operation condition 40
桩机质量 T 邮寄状况 25
Piling machine quality T mailing status 25
