BonDERITE S-ST 6776 LO AERO PAINT STRIPPER 飞机除漆剂
产品简介
BonDERITE S-ST 6776 LO AERO (也叫TURCO 6776-LO),是一种低气味、触变脱漆剂,有效剥离耐抛光物质如环氧树脂,环氧底漆、聚氨酯和类似的催化涂料。
BonDERITE S-ST 6776 LO AERO除漆剂为车间(工厂)的安全提供了非常大的进步。它不包含二氯甲烷、氯化溶剂、酚类、铬酸盐、氨或胺。它完全符合航空/航天国家有害空气污染物排放标准。
BonDERITE S-ST 6776 LO AER可用于铝、低碳钢、铸铁和钛,在指导下使用。
BonDERITE S-ST 6776 LO AERO不建议用于高强度钢材或镁。
特点:
低气味
减少空气污染,0 lb/gal H.A.P.S.;< 2毫米汞柱V.O.C.蒸汽压
降低废物处置成本
可以很容易地处理现场
脱模使用量小于传统的二氯甲烷脱漆剂
煮沸(Pensky-Martens)没有闪点
直接使用,不需要混合或稀释
附着性能优异,可附着于垂直或顶处表面
不需要正压空气呼吸器
INTRODUCTION:
BonDERITE S-ST 6776 LO AERO (known as TURCO 6776-LO) is a low odor, thixotropic paint remover developed for effective stripping of such resistant finishes as epoxies, epoxy primers, polyurethanes, and similar catalyzed paints.
BonDERITE S-ST 6776 LO AERO paint remover offers a significant advance in work place safety. It does not contain methylene chloride, chlorinated solvents, phenols, chromates, ammonia or amines. It complies fully with the aircraft/aerospace NESHAP.
BonDERITE S-ST 6776 LO AERO can be used on aluminum, mild steel, cast iron, and titanium when used as directed.
BonDERITE S-ST 6776 LO AERO is not recommended for use on high strength steel or magnesium.
FEATURES:
Low odor
Reduced air pollution, 0 lb/gal H.A.P.S.; <2 mm Hg V.O.C. Vapor Pressure
Significantly lower waste disposal costs
Can be easily treated on site (see MSDS)
Amount of stripper used less than conventional methylene chloride strippers
No flash point to boil (Pensky-Martens)
Used as received, No mixing or dilution required
Excellent cling to vertical and overhead surfaces
Positive pressure air respirators are not required