![[第5年] 级别:5](http://cn.trustexporter.com/skin/default/image/vip_5.gif)
R-210 Self Stripping Liquid Release Gallon
Directions: On a clean surface apply a small amount with brush, spray, or cloth. Be sure entire area is covered. Allow to dry and brush or wipe off. Excellent on nonskid, grained or sand type finishes. Repeat as required. Liquid mold release is recommended for use on fully cured, well conditioned molds only. It is not recommended on new or reconditioned molds until eight or ten parts have been pulled using paste wax. It should not be used as a final coat over paste wax as the high solvent content is provided to remove wax and wax build up. Rapid settling of liquid waxes requires shaking before and during each use. Each user is encouraged to prepare a test part for his or her particular application.
