TPE Telcar® TL-4129/美国Teknor Apex 低密度,紫外线吸收

手机版链接：https://m.trustexporter.com/cz12461349.htm
Telcar® TL-4129Thermoplastic ElastomerTeknor Apex公司产品说明：Telcar TL-4129 is a low density thermoplastic elastomer designed for the industrial market. Telcar TL-4129 is a clear TPE that is UV stable and is suitable for injection molding and extrusion.物性信息：基本信息特性Low Specific GravitySunlight ResistantWithout Fillers低密度光滑性光稳定流动性低润滑中等硬度紫外线吸收用途工业应用耐候性密封条通用外观清晰/透明形式粒子加工方法挤出注射成型物理性能额定值单位制测试方法比重0.888g/cm³ASTM D792熔流率（熔体流动速率） (230°C/2.16 kg)4.0g/10 minASTM D1238硬度额定值单位制测试方法肖氏硬度ASTM D2240    邵氏 A, 1 秒, 注塑65ASTM D2240    邵氏 A, 5 秒, 注塑63ASTM D2240弹性体额定值单位制测试方法拉伸应力ASTM D412    横向流量 : ****应变 12.08MPaASTM D412    流量 : ****应变 22.93MPaASTM D412    横向流量 : 300%应变 33.46MPaASTM D412    流量 : 300%应变 44.34MPaASTM D412抗张强度 5ASTM D412    横向流量 : 断裂9.60MPaASTM D412    流量 : 断裂5.93MPaASTM D412伸长率 6ASTM D412    横向流量 : 断裂710%ASTM D412    流量 : 断裂490%ASTM D412撕裂强度 7ASTM D624    横向流量37.1kN/mASTM D624    流量30.1kN/mASTM D624压缩yongjiu变形 8ASTM D395B    23°C, 22 hr18%ASTM D395B    70°C, 22 hr87%ASTM D395B法律声明The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.注射额定值单位制料筒后部温度199 到 210°C料筒中部温度204 到 216°C料筒前部温度210 到 221°C射嘴温度216 到 227°C加工（熔体）温度216 到 227°C模具温度35.0 到 65.6°C注塑压力1.38 到 6.89MPa注射速度快速背压0.172 到 0.862MPa螺杆转速50 到 120rpm垫层3.81 到 25.4mm注射说明无需干燥。但如果湿度过大，则将粒料在150°F (65°C)的温度下干燥2-4小时。挤出额定值单位制料筒1区温度193 到 204°C料筒2区温度199 到 210°C料筒3区温度204 到 216°C料筒5区温度210 到 221°C口模温度216 到 227°C挤压说明螺杆转速30 - 100 rpm备注1 .口模 C, 510 mm/min2 .口模 C, 510 mm/min3 .C 模具, 510 mm/min4 .C 模具, 510 mm/min5 .C 模具, 510 mm/min6 .口模 C, 510 mm/min7 .C 模具, 510 mm/min8 .类型 1