优势
经国际认证,专门为海上用途开发的电缆。
高柔性的电缆设计意味着最高的产品性能。
经久耐用,适合长距离移动或高加速度。由此可实现更长的维护周期,可节省成本和提高机器的效率。
通过挤出式内护套提供额外的坚固性。
通过高覆盖率的铜丝编织屏蔽层可**地防止电磁干扰。
用于较长传输路径的低电容芯线绝缘。
特别耐候性,可在广泛的温度范围内使用。
根据欧盟指令305/2011对火灾行为进行分类
应用用于与海水接触的海上应用。
电缆设计可在移动的机器部件和拖链中实现高度灵活、不断弯曲的使用。
专门用于要求电磁兼容性 (EMC) 的环境。
可在干燥、湿潤以及尤其是在恶劣和油性环境中使用。
可承受高机械负荷。
高度耐酸碱。
适用于室外。
铜重 (lb)1942.000 lb/10,000 ft
最小弯曲半径,固定敷设4 x 外径
最小弯曲半径(mm),固定安装64.8 mm
最小弯曲半径,动态连续移动7.5 x 外径
最小弯曲半径 (mm),动态持续弯曲121.5mm
最小弯曲半径,偶尔移动7.5 x 外径
最小弯曲半径(mm),偶尔移动
121.5 mm
最大弯曲寿命10000000
最大行程100 m
最大滑动速度5 m/s
最大自承速度10 m/s
最大加速度50 m/s²
温度,固定敷设-60 °C 至 80 °C
温度,偶尔移动-50 °C 至 80 °C
温度,动态持续移动-50 °C 至 80 °C
advantage
Internationally certified cables specifically developed for offshore use.
A highly flexible cable design ns the highest product performance.
Durable and suitable for long-distance movement or high acceleration. This can achieve longer maintenance cycles, save costs, and improve machine efficiency.
Additional durability is provided through an extruded inner sheath.
The shielding layer woven with high coverage copper wire can effectively prevent electromagnetic interference.
Low capacitance core wire insulation for longer transmission paths.
Special weather resistance, can be used over a wide temperature range.
Classification of fire behavior according to EU Directive 305/2011
application
For offshore applications in contact with seawater.
The cable design allows for highly flexible and continuously curved use in moving machine components and drag chains.
Specially designed for environments that require electromagnetic compatibility (EMC).
Can be used in dry, humid, and especially in harsh and oily environments.
Can withstand high mechanical loads.
Highly acid and alkali resistant.
Suitable for outdoor use.
Technical characteristics
Weight 423 kg/km
Copper grade 289.000 kg/km
Copper weight (lb) 1942.000 lb/10000 ft
Minimum bending radius, fixed laying 4 x outer diameter
Minimum bending radius (mm), fixed installation 64.8 mm
Minimum bending radius, dynamic continuous movement of 7.5 x outer diameter
Minimum bending radius (mm), dynamic continuous bending 121.5mm
Minimum bending radius, occasional movement of 7.5 x outer diameter
Minimum bending radius (mm), occasional movement
121.5 mm
Maximum bending life 10000000
Maximum travel of 100 m
Maximum sliding speed 5 m/s
Maximum self-supporting speed 10 m/s
Maximum acceleration of 50 m/s ²
Temperature, fixed laying -60 ° C to 80 ° C
Temperature, occasionally shifting from -50 ° C to 80 ° C
Temperature, dynamic continuous movement -50 ° C to 80 ° C