AGXV TM
Automatic
Maximum Performer
HVLP Spray Gun
I-2186R
AGXV Automatic Maximum Performer HVLP Spray Gun
AGX Automatic Conventional Spray Gun
Designed for use with robots, automatic
machines and stationary mounting, the AGXV
Automatic Maximum Performer spray gun is
built to withstand the harsh conditions common
to automatic spray finishing applications.
s Abrasive fluid packing available as an option
for more abrasive coatings.
s Detachable spray head for fast needle packing
replacement.
s Circulating capability standard.
s Optional remote fan control.
Built to withstand the rigors of high-speed
production lines and harsh finishing conditions,
the AGX automatic air spray gun is engineered
for rugged reliability. Designed for use with
industrial robots, reciprocators and stationary
mounting, the AGX spray gun’s compact size
allows mounting in tight areas.
s Simplified gun design for greater reliability
and ease of maintenance.
s AGX-550 spray gun comes with a stainless
steel tip for use with many waterborne
materials and chlorinated solvents. AGX-552
guns are specially equipped with carbolloy
fluid tip and needle for use with water-mix
materials and abrasives. AGX-553 guns
include “premium” 300-grade stainless steel
fluid tip with U.H.M.W. polyethylene insert
(needle seat) and 300-grade stainless steel
needle for use with mildly abrasive or
corrosive materials. All AGX models include
300-grade stainless steel fluid passages.
© 2006 ITW Industrial Finishing
AGX
Automatic Conventional Spray Gun
Ordering Information
The AGXV Automatic Maximum Performer
spray gun is available with the following air cap
and fluid tip set-ups, factory assembled for
immediate delivery.
Part No.
AGXV-540-33AFF* AGXV-541-46FX*
AGXV-540-33AFX* AGXV-541-83E*
AGXV-541-46FF* AGXV-543-46FX**
These guns with fluid tip and needle can be
ordered separately without air cap and
retaining ring.
Part No.
AGXV-540-FF* AGXV-541-E*
AGXV-540-FX* AGXV-541-FF*
AGXV-540-G* AGXV-541-FX**
AGXV-543-FX
* Standard tips and needles are stainless steel.
** Includes 300-grade stainless steel with U.H.M.W.
polyethylene seat in fluid tip.
Ordering Information
AGX spray guns are available with the following
air cap and fluid tip set-ups, factory-assembled
for immediate delivery.
Part No.
AGX-550-704E AGX-550-704FX
AGX-550-704FF
These guns with fluid tip and needle can be
ordered separately without air cap and
retaining ring.
Part No.
AGX-550-E AGX-552-Ds
AGX-550-FF AGX-552-EEs
AGX-550-FX AGX-552-FFs
AGX-550-G AGX-553-FF**
AGX-553-FX**
s AGX-552 guns are specially equipped with
carbolloy fluid tip and needle.
** Includes 300-grade stainless steel with U.H.M.W.
polyethylene seat in fluid tip.
AGXV-542-FX**
Accessories
sRemote Fan Control (KK-4955)
Permits remote adjustment of pattern size.
sFluid Tip and Needle Sets
Several kits are available for corrosive materials, primers and highly
pigmented materials.
sMounting Clamp (AGA-415)
Clamps gun stud to rod, allowing gun rotation to any angle.
sAbrasive Fluid Seal Kit (KK-5017)
Designed for use with abrasive materials.
sMounting Block Accessory Kit (KK-5046)
Allows mounting the gun onto a 1/2" rod.
sAdditional Accessories
Fluid regulators, fluid strainers, air control units, gun and hose cleaning
equipment and other accessories also are available.
Accessories
sConvert to HVLP by changing the spray head, air cap and baffle.
(See Service Bulletin SB-2-628.)
sFluid regulators, fluid strainers, air control, gun and hose cleaning
equipment and other accessories are also available.
sKK-5046 Mounting block kit for mounting gun on 1/2" rod.
sFan control kit – for remote operation (KK-4955)
Technical Specifications:
Body:................................................... Machined aluminum
Weight: ............................................... 26 oz (728 gr) without mounting stud
30 oz (840 gr) with mounting stud
Cylinder Air Pressure: ........................ 100 psi (7 bar)max., 50 psi (3 bar) min.
Air Inlet: ............................................. 100 psi (7 bar)max., 1/4" NPS (M)
Fluid Inlet: ......................................... 100 psi (7 bar)max., 3/8" NPS (M)
Wetted Parts: ...................................... 300 Grade stainless steel tips & needles,
stainless steel fluid passages
Feed Type:........................................... Pressure feed
(Material Supply)
Fluid Pressure: ................................... 100 psi (7 bar)max.
Mounting Stud:.................................. 3/4" dia.
Service Bulletin:................................. SB-2-628
Gun Repair Kit:.................................. KK-4992-1
Technical Specifications:
Body:................................................... Machined aluminum
Weight: ............................................... 26 oz. (728 gr) without mounting stud
30.5 oz. (854 gr) with mounting stud
Cylinder Air Pressure: ........................ 100 psi (7 bar)max., 50 psi (3 bar)min.
Air Inlet: ............................................. 100 psi (7 bar)max., 1/4" NPS (M)
Fluid Inlet: ......................................... 100 psi (7 bar)max., 3/8" NPS (M)
Wetted Parts: AGX-550............... 300 & 400-grade stainless steel, PTFE
AGX-552............... 300 & 400-grade stainless steel, Carbolloy,
U.H.M.W. polyethylene
AGX-553............... 300-grade stainless steel, U.H.M.W.
polyethylene, PTFE
Feed Type:........................................... Pressure feed
(Material Supply)
Fluid Pressure: ................................... 100 psi (7 bar)max.
Mounting Stud:.................................. 3/4" dia.
Service Bulletin:................................. SB-2-624
Gun Repair Kit:.................................. KK-4992-1
Chart 1 AGXV Air Caps—Patterns & Applications
Air Cap # Typical Pattern Typical
(Complete No.) Size & Shape* Application
33A 9"(229 mm) long, tapered ends Most common finishing materials
(JGHV-101-33A) similar to 30 air cap up to 12 oz./min. (360 cc)
46MP 11"(280 mm) long, straight-sided Low VOC material
(JGHV-101-46MP) similar to 704 air cap 12 to 16 oz./min. (360-480 cc)
83MP 13"(330 mm) long, straight-sided Low VOC material
(JGHV-101-83MP) similar to 765 air cap 17 oz./min. (510 cc) & above
AGXV TM
Automatic Maximum Performer
HVLP Spray Gun
AGX
Automatic Conventional
Spray Gun
*Actual pattern length dependent upon fluid tip (nozzle) ID, coating material flow rate,
air pressure and fan pressure.
Chart 2 AGX Air Caps
If this No. on Cap, Ref. No. (2) Ref. No. (1 & 2)
Order Air Cap Air Cap
Less Retaining Ring With Retaining Ring
24 AV-40-24
30 MB-4039-30
58 AV-439-58
62 MB-4039-62HD
64 MB-4039-64HD
704 AV-1239-704
765 AV-1239-765
777 31767-777
797 AV-1239-797
Fluid Tip Orifice Sizes
Letters on Tip Inch mm
AC .110" 2.8
D .086" 2.2
E (Stainless) .070" 1.8
EE (Carbolloy) .070" 1.8
FF .055" 1.4
FX .042" 1.1
G .028" 0.7
Retaining ring required (MBC-368)
© 2013 DeVilbiss 2/13
195 Internationale Blvd.
Glendale Heights, IL 60139
630-237-5000
Fax 630-237-5011
www.devilbiss.com
