旋紧紧力螺栓。所有紧力螺栓均需用力矩板手按标明的固定扭力矩数据进行固定和检查。减速机与机械设备间的正确安装类同减速机与驱动电机间的正确安装。关键是要必须保证减速机输出轴与所驱动部分轴同心度一致。
Tighten tight bolt. All tight bolts must be fixed and checked with the fixed torque data marked by the torque plate hand. The correct installation between the reducer and the mechanical equipment is the same as that between the reducer and the driving motor. The key is to ensure that the output shaft of the reducer is consistent with the of the drive shaft.
对减速机箱体进行共振测试，找出共振位 置，增加适当的筋条（板），可以提高箱体的刚度，丹东reducer，减少箱体的振动，实现降噪。多级传动时要求瞬时传动比的变化尽量小，reducer生产商，以保证传动平稳，reducer价格，冲击及振动小，噪声低。
By testing the resonance of the reducer box， finding out the resonance and adding appropriate ribs (plates)， the stiffness of the box can be increased， the vibration of the box can be reduced and the noise can be reduced. In multistage transmission， the change of instantaneous transmission ratio should be as small as to ensure stable transmission， low impact and vibration， and low noise.
减速机与工作机的联接：减速机直接套装在工作机主轴上，当减速机运转时，作用在减速机箱体上的反力矩，又安装在减速机箱体上的反力矩支架或由其他方法来平衡。机直接相配，另一端与固定支架联接.
The connection between the reducer and the working machine: the reducer is directly installed on the main shaft of the machine， when the reducer operates， the torque acting on the gearbox body is installed on the reverse torque support on the reduction box body or by other methods to balance. The machine is directly matched and the other end is connected with the fixed support.
丹东reducer-圣霖国际(推荐商家)由鞍山市圣霖进出口贸易有限公司提供。鞍山市圣霖进出口贸易有限公司（shenglininternational.cn）是一家从事“型材设备,轧钢设备,轨道设备”的公司。自成立以来，我们坚持以“诚信为本，稳健经营”的方针，勇于参与市场的良性竞争，使“圣霖”品牌拥有良好口碑。我们坚持“服务为先，用户至上”的原则，使圣霖国际在行业专用设备中赢得了众的客户的信任，树立了良好的企业形象。 特别说明：本信息的图片和资料仅供参考，欢迎联系我们索取准确的资料，谢谢！