SF-TF型透浦式抽送风机 TURBO FAN
风机特点：
TF型本型风叶形状叶片向后弯，可容许少量灰尘进入，外壳及叶轮采用优质钢板焊接，结构紧凑，强度高，适合高速运转，具有风量较大，较强的中压能力，效率高，运行平稳，安全耐，保养方便。
风机用途：
本机最适合家私木业加工行业，粉尘含量较大的行业，排尘吸收工程使用，亦可用在化工、电子、塑料、纺织、石材装饰、喷涂等行业的强制送风，诱引通风排尘、吸尘、气体输送用，是一种使用广泛的机型
风机选用注意事项：
1.风量、静压、转数，随客户要求可另行设计，马力至300HP。
2 防爆要求风叶可选用铝叶轮
3.马达直结驱动风叶时，注意马达运转时电流额度。
2.皮带轮驱动风叶时，注意轴承常注油，皮带不要鬆动。
Fan characteristics:
TF type blade is backward-curved, allowing a small amount of dust to enter. The shell and impeller are welded with high-quality steel plate, compact structure, high strength, suitable for high-speed operation. It has large air volume, strong medium pressure capacity, high efficiency, stable operation, safe and durable deformation, and convenient maintenance.
Uses of Fans: This machine is most suitable for the processing industry of private wood industry, the industry with high dust content, the use of dust exhaust and absorption engineering, and also can be used for forced air supply in chemical industry, electronics, plastics, textile, stone decoration, spraying and other industries, to induce ventilation and dust removal, dust collection and gas transmission. It is a widely used machine type.
Matters needing attention in fan selection
1. Air volume, static pressure and rotational speed can be designed separately with 300 HP horsepower as required by customers.
2. Explosion-proof requirement that the blade should be made of aluminium impeller
3. When the motor is directly connected to drive the blade, pay attention to the current quota when the motor is running.
2. When the belt pulley drives the wind blade, pay attention to the bearing oil often, and the belt should not loosen.