中国西门子CPU一级代理商|模块代理中国西门子CPU一级代理商|模块代理中国西门子CPU一级代理商|模块代理
中国西门子CPU一级代理商|模块代理
中国西门子CPU一级代理商|模块代理
Memory cards |
SINAMICS SD memory card
The parameter assignment, firmware and licenses for a converter can be stored on the SINAMICS SD memory card. When service is required, e.g. after the converter has been replaced and the data have been downloaded from the memory card the drive system is immediately ready for use again.
The memory card has the following functions:
Parameter settings can be written from the memory card to the converter or saved from the converter to the memory card
The memory card supports series commissioning without the use of a commissioning tool
If firmware is stored on the memory card, the firmware can be upgraded/downgraded during startup
It is used for storing licenses when using functions under license, e.g. the license for enabling the Extended Safety functions
Safe Stop 1 (SS1) 1)
Safe Stop 2 (SS2)
Safe Operating Stop (SOS)
Safely-Limited Speed (SLS)
Safe Speed Monitor (SSM)
Safe Direction (SDI)
Safely-Limited Acceleration (SLA)
Safe Brake Test (SBT) diagnostic function
Notes:
In general, the converter can be operated without a memory card. However, it is necessary if licenses, such as the Extended Safety license, are required. The card must then remain permanently inserted.
Firmware V5.2 or higher is required for the 3 AC series or when using the SINAMICS Startdrive commissioning tool.
1) Safe Stop 1 time controlled (SS1-t) can also be found in the Basic Safety Functions.
更多信息Certificate of License (CoL)The CoL is the licensee's proof that the use of the software has been licensed by Siemens. A CoL must be assigned to each use and must be kept in a safe place.
Electronic Certificate of License
The electronic Certificate of License is the paperless delivery form for runtime options for SINAMICS, SIMOTION, and SINUMERIK.
Like the previous paper Certificate of License CoL, the electronic Certificate of License contains information about the type of rights of use purchased for the software. The electronic Certificate of License is supplied as a PDF file via the online Software Delivery Portal (OSD). This enables quick notification with a download link to the email address to be stated in the order.
The electronic Certificate of License can then be downloaded from the OSD. The Web License Manager can also be called from the OSD to assign the runtime license to a memory card. In this case, the data of the electronic Certificate of License are automatically transferred to the Web License Manager and do not have to be entered manually.
This ensures quick availability of the license key and simple and secure handling and management of the license certificates.
You will find information on the OSD at:<br. cs="" document="" 109759444
Electronic Certificate of License: Procedure for order licenses
In the future, the pre-licensed memory cards will also be delivered with the corresponding electronic Certificates of License on the memory card. The Certificates of License are stored in directory "KEYS". The pre-licensed memory cards will successively make the transition from paper CoLs to electronic CoLs. The CoL on paper will then no longer be contained in the delivery.
Electronic Certificate of License: Storage location on data medium
