pompes grosclaude泵
MX series
The MX series mono- and multicellular centrifugal pumps are specially designed for a wide range of uses in the chemical and fine chemicals industries and especially for difficult or corrosive products.
Thanks to their horizontal mono-block design, the MX series pumps don't take up a lot of space, making their integration into compact Skid types of assemblies easier. The pump and the motor form a monoblock set connected by flanges, with a common shaft..
MX/S series
The mono- and multicellular centrifugal pumps in the MX/S are specially designed for a large range of chemical and fine chemical uses, and particularly for corrosive products that are clear or loaded or low-temperature products.
Thanks to their horizontal monoblock design, the MX/S pumps don't take up a lot of space, making their integration into compact "Skid" types of assemblies easier. The pump and the motor form a monoblock set connected by flanges, with a common shaft.
MRX series
The mono- and multicellular centrifugal pumps in the MRX series are specially designed for the transfer or flow of thermal, corrosive or aggressive products. This pump technology allows operation at both negative and positive extreme temperatures.
Thanks to their horizontal mono-block design, the MRX series pumps do not take up a lot of space, making their integration into compact "Skid" types of assemblies easier. The pump and the motor form a mono-block set connected by flanges, with a common shaft.
MGX series
The mono- and multicellular centrifugal pumps in the MGX series are specially designed for a large range of chemical and fine chemical uses, and particularly for products that are corrosive and dangerous to humankind and the environment.
The MGX pumps are designed to avoid any leaks, even fugitive ones, of products pumped outdoors. This specific tightness is obtained using magnetic coupling that can be used with either hot or cold products.
Thanks to their horizontal monoblock design, the MGX pumps do not take up a lot of space making their integration into compact Skid types of assemblies easier.
LF series
The LF series centrifugal pumps are specially designed for a large range of varied industry uses.
Thanks to an In-Line, mono-block design, the LF series pumps do not take up a lot of space, making their integration into compact Skid types of assemblies easier.
The pump and the motor form a mono-block set connected by flanges, with a common shaft.
LR series
The self-cooling centrifugal pumps in the LR, series are specially designed for the flow of thermal fluids and for use under extreme temperatures.
Because of their mono-block design and In-Line installation, LR pumps take up limited space, which makes their integration into compact Skid assemblies much easier.
The pump and the motor form a mono-block set connected by flanges, with a common shaft.
LGF/LGX Series
The centrifugal pumps in the LGF, series are specially designed for industrial use of thermal fluids and for environmental protection.
The LGF pumps are designed to avoid any leaks, even fugitive ones, of products pumped outdoors. This specific tightness is obtained using magnetic coupling that can be used with either hot or cold products.
Because of their monoblock design and In-Line, assembly, LGF pumps take up limited space, which makes their integration into compact "Skid" assemblies much easier.
MF series
The mono- and multicellular MF series centrifugal pumps are specially designed for a large range of industrial uses.
Thanks to their horizontal mono-block design, the MF series pumps don't take up a lot of space, making their integration into compact Skid types of assemblies easier. The pump and the motor form a mono-block set connected by flanges, with a common shaft. Different types of API-conformed tightness are available and the mechanical seals conform with DIN 24 960.
MR series
The self-cooling, mono and multicellular centrifugal pumps in the MR series are specially designed for the flow of thermal fluids and for use under extreme temperatures.
With a unique design that takes up less space, they easily integrate into industrial assemblies. Direct coupling, without motor alignment, ensures easy maintenance.
ALFA M Series
The standard centrifugal monoblock pumps in the ALFA M series are specially designed for a large range of varied industry uses. Their hydraulic sizes and performance comply with norm
ISO 2858 or NF 44 121.
Thanks to a horizontal monoblock design, the ALFA M series pumps don't take up a lot of space, making their integration into compact "Skid" types of assemblies easier. The pump and the motor (standard available on the market) form a monoblock joined together by flanges.
LF series
The LF series centrifugal pumps are specially designed for a large range of varied industry uses.
Thanks to an In-Line, mono-block design, the LF series pumps do not take up a lot of space, making their integration into compact Skid types of assemblies easier.
The pump and the motor form a mono-block set connected by flanges, with a common shaft.
LR series
The self-cooling centrifugal pumps in the LR, series are specially designed for the flow of thermal fluids and for use under extreme temperatures.
Because of their mono-block design and In-Line installation, LR pumps take up limited space, which makes their integration into compact Skid assemblies much easier.
The pump and the motor form a mono-block set connected by flanges, with a common shaft.
LGF/LGX Series
The centrifugal pumps in the LGF, series are specially designed for industrial use of thermal fluids and for environmental protection.
The LGF pumps are designed to avoid any leaks, even fugitive ones, of products pumped outdoors. This specific tightness is obtained using magnetic coupling that can be used with either hot or cold products.
Because of their monoblock design and In-Line, assembly, LGF pumps take up limited space, which makes their integration into compact "Skid" assemblies much easier.