槽式给矿机 Chute feeder
1.1产品特点
槽式给矿机一般吊装在矿仓卸料口上。槽底板做往复运动，实现给矿，其冲次为20-60次/min，冲程为20-200mm。给矿量的多少由冲程大小决定，冲程调节方法为：调整驱动装置偏心轮的偏心量来进行适当的调整。
1.2选用说明
根据选矿规模和作业制度提出相应的给矿机型号由生产厂配套制造，电机可改为调速电机,需特别订货。
1.1 Product Features
Chute feeder is generally hung at the discharging port of ore bin. Feeding is realized through reciprocation of the bottom plate of the chute, with 20-60 times/min, and stroke of 20-200mm. The feeding quantity depends on the stroke. The method of adjusting the stroke is to make proper adjustment through adjusting the eccentricity of eccentric wheel of drive unit.
1.2 Notes of selection
According to benefication scale and operation rules, specify the model of corresponding feeder, which shall be made by the manufacturer. The motor can be changed to a speed-regulating motor, which shall require a special order.
