PBL2型聚合物改性沥青防水涂料

    PBL2型聚合物改性沥青防水涂料（PBL2型聚合物改性沥青防水涂料）是以石油沥青为基料，以SBS橡胶为改性剂，以天然纳米材料为填料，并辅高分子聚合物经科学配方生产而成的水性防水涂料。具有优良的施工性能和使用性能，涂膜弹塑性、低温柔韧性及抗老化性优良；PBL2型聚合物改性沥青防水涂料不但具有优良的耐水性、抗渗性，且涂膜柔软、具有高档防水卷材的功效，  又有施工方便，潮湿基层可固化成膜、粘结力强、  可抵抗压力渗透、特别适用于复杂结构，  可明显降低施工费用，  用于各种材料表面，  为新一代环保防水涂料。 

产品特点 

1、冷施工，无毒、无味、无污染；、能厚涂，省工节时； 

2、施工安全方便，能在潮湿基层施工，对混凝土、木材、石棉板都有优异的粘结性； 

3、低温延伸性特优，能良好地适应基层变形，确保工程防水质量； 

4、耐高温、耐腐蚀、耐老化。 

产品质量指标 ：产品质量满足JC/T408-2005 和Q/TGJK001－2012标准要求： 

适用范围 ：

1、各种预制、现浇混凝土结构的厂房、仓库、桥梁、民用建筑等屋面及接缝防水； 

2、底层住户的地面性防湿及厨卫间、阳台的长期防水、地下室墙面、基底及水池的防水防渗； 

4、维修老沥青油毡屋面、石棉瓦屋面及各种结构的天沟、泛水等漏水； 

5、管道构件的防腐，也可涂刷在自防水刚性构件表面，起抗渗及防止构件粉化腐蚀作用。 

基层要求 ：

基层质量直接关系到防水层的使用寿命，因此，基层必须符合以下要求： 

1、水泥砂浆或混凝土标号必须符合设计要求； 

2、基层要坚实、平整、无凹凸麻面、无起砂等； 

3、与突出屋面结构的连接处及基层的转角处均应做成圆弧形，其半径不宜小于50mm； 

4、分格缝与板端缝对齐，缝宽20mm； 5、若有保温层，每10~40m2开设一个排气孔。 

施工顺序及方法： 

施工顺序应先作节点，附加层，然后再进行大面积涂刷；  

注意事项 ：

1、基层应养护达到一定强度（不小于0.3MPa）后方可施工； 

2、涂料使用前必须充分搅匀； 

3、每一道施工必须在涂层干透后，方能进行后一道施工，粘脚现象可事先在行走部位浇点水加以克服； 

5、本产品储存期为九个月；按照非危险品贮存与运输。 

7、施工中必须注意防火及通风措施，配备防火器具，施工人员配戴手套和口罩等相应的防护用具，以防化学中毒。注意成品保护措施，下道工序施工时必须严格保证不得破坏防水涂膜层，避免影响防水效果。 

用量： 按1.0mm厚，每平方用量1.2-1.5公斤。 

包装：50kg/桶 

Company main: home decoration waterproof Luqiao waterproofing waterproofing membrane plugging materials to undertake various waterproof projects.

 

K11 waterproof coating, JS polymer waterproof coating, silicone rubber waterproof coating, silicone rubber waterproof coating, SBS modified asphalt waterproof coating, polymer modified asphalt waterproof coating, strong exterior wall permeable waterproof adhesive, 911 non tar polyurethane waterproof coating, single component wet solidified polyurethane waterproof coating Single component waterborne polyurethane waterproof coating cement osmotic crystalline waterproof coating single component polyurethane sealant color steel structure special waterproof coating DPS permanent condensate RG polymer cement waterproof coating

 

FYT-1 modified bridge deck waterproof coating FYT-2 polymer bridge deck waterproof coating FYT-2 polymer bridge waterproof coating

 

HUT-1 reactive bridge deck waterproof coating HB-V waterproof coating HUG-13 bridge surface waterproof agent JBS environmentally friendly bridge deck waterproof coating, polymer modified asphalt waterproof coating, polymer modified asphalt waterproof coating, FLG Luqiao special waterproof coating, BMP-3 Luqiao waterproof coating PB road bridge with polymer modification Bituminous waterproof coating

 

Bitumen mastic FBT-1500 type Luqiao special waterproofing coating GS solvent adhesive HM-1500 waterproof coating for bridge deck

 

HY-1 waterborne polyurethane waterproof coating WPB environmentally-friendly deck waterproof coating APP polymer modified bitumen waterproof coating

 

FBT-1500 type Luqiao special waterproof coating SBR modified asphalt bridge waterproof coating, polymer modified asphalt waterproof coating, YN polymer asphalt bridge waterproof coating epoxy silane modified dipping liquid asphalt based bridge surface waterproof coating M1500 waterborne inorganic waterproofing agent SJT4000 waterproof paint, SJT4000 waterproofing paint Solvent rubber asphalt waterproof coating fiber reinforced bridge deck waterproof coating

 

QMSS-007A bridge deck waterproofing coating AE-2-5 waterborne asphalt based waterproof coating for bridge deck

 

High strength transparent building waterproof coating, permeable bridge deck waterproofing agent, high elastic rubber waterproof coating (liquid membrane).

 

Polymer strong cross membrane reactive self-adhesive waterproofing membrane strong cross membrane polymer reactive self-adhesive waterproofing membrane

 

Double faced reactive polymer adhesive waterproofing membrane PET polymer self-adhesive waterproofing membrane (polyester tire single side)

 

Epoxy resin modified epoxy resin with high permeability